Hangar

LAB DESCRIPTION

• The school of aerospace engineering hangar is a building that is focusing on aviation sector.
• Current project - assembly of ch750 aircraft kit that occupies most of the facilities in the hangar.
• On the hangar bay – actual aircraft and a helicopter are ready for use in teachings and for public visit.
• The hangar is managed by a lecturer that supervises the whole activities and is assisted by three technical staffs including a vocational training officer for the maintenance and any activities related to the hangar.
• A seminar room that is located on the first floor gives a great view of the surrounding. The hangar is located adjacent to a man-made lake with some palm oil trees surroundings that give a wonderful breath taking a view.
• A 2 tonnes ceiling-mounted crane is also available at the hangar.

LAB MANAGER

PE Dr A. Halim Kadarman

Assistant engineers

Engr Mohamad Zihad Mahmud

Mr Mohd Fauzan Jali

Mr Ismail Mohamed Shorhami

equipment

Facilities:

1) Aircraft assembly workshop

2) Aero modelling workshop

3) Avionics workshop

4) Seminar room (complete with pc, projector, table and chairs)

5) Vocational training officer room

6) Assistant engineer room

7) Store

8) Air compressor room

9) Bay area (wasp helicopter, aermacchi aircraft, 2 microlights)

10) 2 tonne overhead crane

Equipment:

Aircraft related

1) Cleco - spring clecos #20, #30 and #40

2) Cleco - wing nut spring clecos #20, #30 and #40

3) Cleco – speed nut type clecos #20, #30 and #40

4) Cleco pliers

5) Tensiometer aircraft control cable

6) Swaging tools

7) Rivet fan

8) Long cut aviation snips

9) 4" nylon spring clamp

Riveter

1) Hand riveter

2) Pneumatic air riveter

Drill

1) Pneumatic air drill tools

2) Drill bit #20, #30 and #40 size

Air tools

1) Assorted pneumatic air hand tools

Wrenches

1) Combination wrenches

2) Torque wrench proto 6060a - yearly calibrated – MS ISO/IEC 17025

3) Torque wrench proto 6062cx – yearly calibrated – MS ISO/IEC 17025

Hand tools

1) Measuring tools (steel ruler, measuring tape, plumb bob, digital level)

2) Hand tools (mallet, hammer)

3) Clamps (small g- clamps, medium g-clamps, big g-clamps, table clamps)

4) Hand grinder

5) File

6) Rubber mallets

7) Claw hammer

8) Ball peen hammer

Machine

1) Stayer table saw

Avionics

1) Programmable dc power supply

2) Electric solder

Painting

1) Spraying paint gun sprayer

Machine

1) Stayer table saw

contact

Phone : 04 599 6546, 6547